Download All Latest TWRP 3.1.0 ft ADB-backup A/B OTA zip and 8.0 Support

The team behind TWRP has released version 3.0.0 (3.0.0-0) of the popular custom recovery for Android devices. TWRP is the to-go custom recovery for many Android fanatics who flash custom ROMs and kernels on a daily basis, for fun or for other reasons.

TWRP (Team Win Recovery Project) is one of the most popular and one of the best custom recovery available for Android. It’s a touch-based recovery comes with many cool features including a file manager and terminal emulator. TWRP updates their recovery to v3.1.0 and here we share a link to Download TWRP 3.1.0 featuring ADB backup, A/B OTA zip, Android 7.1.1 Support and more. It is a most widely used recovery that supports many official and unofficial devices. With TWRP you can flash custom ROMS, modem and firmware files also you can.

TWRP is a most widely used recovery that supports many official and unofficial devices. With TWRP you can flash custom ROMS, modem and firmware files also you can backup and restore your current ROM. After a long time, TWRP gets a major update with many bug fixes and many new features. The new update of TWRP 3.1.0 support for ADB backup to PC, AB OTA support, stability support for Android 7.1 firmware, decryption support, etc.

Also read: Xiaomi firmware MIUI 9: fast, intelligent, interactive

TWRP 3.1.0 Features and Changelogs –

vold decrypt on a few select HTC devices, TWRP will now attempt to use the system partition’s vold and vdc binaries and libraries to decrypt the data partition (nkk71 and CaptainThrowback)
adb backup to stream a backup directly to or from your PC, see documentation here: https://github.com/omnirom/android_bootable_recovery/commit/ce8f83c48d200106ff61ad530c863b15c16949d9 (bigbiff)
tweak MTP startup routines (mdmower)
support new Android 7.x xattrs for backup and restore to fix loss of data after a restore (Dees_Troy)
support POSIX file capabilities backup and restore to fix VoLTE on HTC devices and possibly other issues (Dees_Troy)
better indicate to users that internal storage is not backed up (Dees_Troy)
improve automatic determination of TW_THEME (mdmower)
minimal getcap and setcap support (_that)
try mounting both ext4 and f2fs during decrypt (jcadduono and Dees_Troy)
shut off backlight with power key (mdmower)
timeout during FDE decrypt (Dees_Troy and nkk71)
support for FBE decrypt and backing up and restoring FBE policies (Dees_Troy)
boot slot support (Dees_Troy)
TWRP app install prompt during reboot (Dees_Troy)
support for AB OTA zips (Dees_Troy)
support new Android 7.x log command (Dees_Troy)
update recovery sources to AOSP 7.1 (Dees_Troy)
numerous bugfixes and improvements by too many people to mention

With the massive list of the changelog, everyone excited to try this latest recovery. So we decided to share a link to Download TWRP 3.1.0 and post a simple guide of how to install TWRP Recovery on Android Phones. This is the official release of the awesome TWRP to all supported devices. There is more than one method to install TWRP Recovery on Android Phones, and we cover all of that so you can choose what best for you.

Download TWRP 3.1.0 Recovery for all Supported Devices

Download TWRP v3.10
twrp 3.0.2-0 zip download
download twrp 3.0.2 zip
twrp 3.0.2-0 apk download
twrp 3.0.0-0 download
twrp 3.0.2-0 tar
twrp 3.0.2-1 download
team win recovery project 3.0.2-0 apk
Latest- twrp recovery 3.1 0 download

See documentation here (bigbiff) ADB: Add adb backup for TWRP.

Functionality for client side to backup
tar and image streams over adbd to the client under backup.ab.

Using adb backup on the client side you can backup the partitions
TWRP knows about.

On the client side you can do the following:
adb backup -f <filename> --twrp <options> where options are
--compress: compress data
system: backup system
cache: backup cache
data: backup data
boot: backup boot
etc for each partition.

You can string multiple options,
i.e. adb backup -f <filename> --twrp --compress cache system data

adb backup in TWRP will take any option corresponding
to TWRP fstab partitions, e.g. efs boot as well.

If you do not specify the filename with the -f option,
adb will backup your data to a filename backup.ab on the client.
You can then rename the file and encrypt it with desktop tools.

If you don't want to use command line arguments:
adb backup --twrp

will bring up the gui and allow you to choose partitions
from the backup page.

To restore the backup use the following convention:
adb restore <filename>

Structures are used to store metadata in binary inside
of the file itself. If the metadata structure is modified,
update the adb version so that it will invalidate older
backups and not cause issues on restore. When restoring,
we currently do not support picking specific partitions.
It's all or nothing.

Change-Id: Idb92c37fc9801dc8d89ed2a4570e9d12e76facf8

How to install TWRP Recovery on Android Devices

Method 1 – Install TWRP Recovery via Fastboot:

First enable USB debugging from setting>developer option>About phone and tap the Build Number 7 times.To enable Developer Options.
For this method, you have to install ADB and Fastboot on your PC first.
Download TWRP 3.1.0 image file, rename it to recovery.img (optional) and place it in a folder where adb and fastboot installed.
Now go to installation directory open ADB folder and open the command window there by pressing and hold the ‘shift’ key and right-click anywhere in that folder.
Now connect your phone to PC and reboot the device into fastboot mode by typing “adb reboot bootloader”.
Type “fastboot devices” in command prompt and hit enter, it gives you serial numbers in return means your phone connect properly.
Type this command correctly in command prompt “fastboot flash recovery recovery.img” and then press enter. It will update TWRP recovery to v3.1.0.
Now type “fastboot reboot “ in command prompt it will restart your phone.

fastboot cmd

Method 2 – Install TWRP 3.1.0 Recovery on Android Phones with Flashify

Download and install flashify from play store. (This process needs your phone to be rooted)
Download TWRP 3.1.0 image file.
Now open flashify and it will ask for SuperSu permission, grant it.
Now in the main page click on recovery image and choose recovery.img file or twrp.img file.
Now click ok to flash TWRP 3.1.0 recovery on your device.

Method 3 – Flash TWRP Recovery zip file from Recovery

For this method, you must have a rooted phone and custom recovery installed.
Download TWRP 3.1.0 zip file.
Reboot your phone into Recovery mode by pressing a combination of buttons.
Now in recovery mode select the ‘twrp.zip’ and swipe to flash the recovery.

That’s all, and this is the complete guide to Download TWRP 3.1.0 Recovery. And with the help of above all methods, you can easily install TWRP Recovery on Android devices. If you have any questions from above approaches comments below.

Search Entries:
twrp 2.8.7.0 apk,twrp 2.8.7.0 tar,twrp 2.8.7.0 note 3,twrp 2.8.7.0 img download,twrp 2.8.7.0 hlte,klte,n9005,note 3,twrp recovery install,twrp recovery apk,twrp 2.8.7.0 download,twrp 3.0.2-0 download,twrp recovery img,twrp download zip,twrp recovery img download,twrp 3.0.2-0 download tar,twrp 3.1.0 img,twrp 3.1.0-0 zip,twrp 3.1.0-0 download,twrp 3.1.0-0 tar,twrp 3.1 apk,twrp 3.1 img,twrp 3.1.0 download

Ultimate Guide to Using TWRP Recovery and Root Essential Phone

Step 1- Accessing TWRP’s Interface

The actual process of booting into custom recovery varies from device to device. If you have one of the more common devices.

Software Methods

All devices, if rooted, can utilize various software options to enter recovery from within Android. I’ve previously highlighted some of these options in this tutorial. While the article is geared toward a Nexus 5, all options listed should work just fine on all of the above-listed phones and tablets.

Step 2- Making a NANDroid Backup

First and foremost, when using custom recovery to install various hacks, you should always have a backup handy in case things were to go awry. This is called a nandroid—”NAND” as in flash memory, and “droid” as in Android.
TWRP has made this process about as simple as it gets. From the home screen, simply tap Backup to begin. From here, leave all the options ticked just as they are, and swipe the slider at the bottom to create your backup.
This will create a set of image files that function as a snapshot of your device’s current setup. If you ever need to restore this backup, every tiny little aspect of your device will be recreated as if nothing ever changed.

Because nandroids are snapshots of everything, they can take up quite a bit of storage on your device. For this reason, you may want to consider copying the file over to your computer via USB cable—they will be in your TWRP/Backup folder.

Step 3- Restoring an Existing Backup

Say you’ve already created a backup and you were tinkering around with a cool mod. But this mod wasn’t compatible with your device, and now you can’t seem to start Android. No worries, you have a custom recovery installed, remember?
From TWRP’s main screen, tap the Restore button. Next, you’ll be shown a list of all the backups you’ve made with TWRP. Just tap the one with the most recent date as its file name, and you’ll be presented with the available partition images that you can restore. If you copied the nandroid to your computer, move it back to the TWRP/Backup before you restore.

Again, it’s probably best to leave everything ticked, then you can simply swipe the slider to restore. When the restore process is finished, everything on your Android device will be exactly the same as it was when you created the backup files.

Step 4- Flashing ZIPs

Let’s face it, this is the main reason you installed a custom recovery—to have access to all of the hacks that come in the form of a flashable ZIP file. In fact, it’s such a key feature of TWRP that it’s the very first button on the home screen.

To start flashing a ZIP, just hit the Install button on TWRP’s main menu. From here, you’ll be shown your device’s internal storage folder tree. As a rule of thumb, ZIPs that you’ve downloaded from the internet will be in your Download folder, so head in there. From here, it’s just a matter of tapping the ZIP file in question, then swiping the slider at the bottom to flash it.

Flashing More Than One ZIP at Once

But let’s say there are multiple ZIPs that you want to flash at one time. This is common with custom ROMs that require a separate ZIP for access to Google apps and such. When you’ve tapped the first ZIP, rather than swiping the slider to install it, then repeating the process for all the ZIPs in question, simply hit the Add More Zips button. This will take you back to the folder tree view, where you can select your second ZIP. Hit Add More ZIPs again to add a third, and so on.
When you’re satisfied with your selections, swipe the slider at the bottom, and all of your ZIPs will be flashed in sequential order.

Finalizing the Flashing Process

After installing a ZIP file, TWRP gives you a few options: Home, Wipe Cache/Dalvik and Reboot System. The first option takes you back to TWRP’s main screen, and the third option should be self-explanatory. The second option, Wipe Cache/Dalvik, is one that should be noted.

Android accumulates various bits of data as you continue to use it. Sometimes, this data is specific to your current setup. Certain mods will cause conflicts between the new functionality they bring and the existing data on your device. Most mods, however, will not cause a conflict with this data. But when in doubt, wipe it out—simply tap Wipe Cache/Dalvik after flashing a ZIP, then swipe the slider at the bottom to remove any potentially-conflicting data.

Step 5- Wiping Existing Data

When using TWRP to install a new ROM, it’s a good idea to wipe the existing firmware to give the new system a clean slate upon which to install. So before installing CyanogenMod, for instance, you’ll want to wipe the stock firmware from your device so there are no conflicts. From TWRP’s main screen, tap Wipe to begin. The preset wipe mode will work perfectly fine in most cases, so swipe the slider at the bottom to perform the wipe.

If you’re experiencing bugs and you want a completely fresh start, or you just want to be entirely sure there’s no preexisting data left to cause conflicts, you can use the Advanced Wipe feature from the same screen. From here, just tick the boxes next to Dalvik Cache, System, Data and Cache, then swipe the slider at the bottom to perform a full wipe.

Step 6- Fixing Permissions

Sometimes, flashing mods and installing root apps can cause Android to sorta “forget” what permissions various apps had to begin with. System-level apps need their permissions set a certain way to perform correctly, so you could end up with minor bugs and force closes after installing a hack.

If this ever happens, you can easily reset all apps on your device back to their proper permissions using TWRP. From the main screen, tap Advanced, then choose Fix Permissions from the following menu. Then just swipe the slider at the bottom and all of your apps will automatically be given the proper permissions for their respective folders.

Step 7- Booting Back into Android

To get out of TWRP and back into Android, start by tapping the Reboot option from the home screen. On the next menu, simply tap System to boot back into Android. I hope this guide helped you get to know TWRP, because there are so many powerful things it can do. If you have any questions, post them in the comments section below and we’ll be sure to answer them.